Another custom tailored TBG4. Dimensions: 49″ x 22-3/8″ x 2″ 24L Finished off with light blue, resin tint.
Here’s the latest iteration of my “T-Belly” belly board. With stringer-less EPS/Epoxy construction, and quad fins, this board is fast and responsive. The dimensions are 48″ x 22-1/4″ x 2″ 23L. You can read all the technical stuff HERE These… (READ MORE)
These are the last two TBG3s. The one on the left is for a 300lb rider, while the one on the right is for a 170lb rider. The biggest difference in these last two G3s is the switch from a… (READ MORE)
Check-out my recent interview conducted by Bob Green of the MyPaipo.org belly-board forum. I’m building more and more of these fun little boards. Pricing starts at $299. Contact me for more info or if you want to test drive one.
This 9-4 Nova 2+1 is nearing completion. I’ve been pretty occupied with belly boards over the past month. Here are a couple of recent builds. Follow this link if your interested in the story behind these incredibly fun shapes. I’ve… (READ MORE)
Here are a couple of boards near completion. The first is a 43″ T-Belly G2 waiting to have its gloss coat sanded. Next is a 9-4 Nova for Nick which is waiting for a light sanding and some polishing. Summer… (READ MORE)
Here’s a couple of T-Belly G2s This one is going to Customer Daryl in Oregon And this one has already seen some testing at my local point…
This is the second post on the T-Belly G2 build. The blank was given a sealer coat of epoxy resin and cabosil. The sealer coat helps to fill in the tiny pock marks left in the EPS foam after shaping,… (READ MORE)
I’ve been working on a couple of belly boards, one of which is a prototype for the next generation of T-Bellys. Here are some photos of the early stages of the build. I plan to do a complete article on… (READ MORE)